Work out your fence
The block size is Median of 1 house lots in Killawarra. The metres are an estimate; change them to match your property.
Killawarra 2429 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,390–$9,990.
Your 50/50 share · treated pine paling
$7,390–$9,990
99.9 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Killawarra. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,390–$9,990 | $14,790–$19,980 | $2,780–$3,760 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,240–$7,890 | $12,490–$15,780 | $2,350–$2,970 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,500–$7,490 | $3,000–$14,990 | $560–$2,820 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,000–$4,500 | $4,000–$8,990 | $750–$1,690 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,900–$17,480 | $5,790–$34,970 | $1,090–$6,580 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,000–$19,980 | $7,990–$39,960 | $1,500–$7,520 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,990–$17,480 | $17,980–$34,970 | $3,380–$6,580 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,190–$15,780 | $18,380–$31,570 | $3,460–$5,940 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,990–$13,740 | $19,980–$27,470 | $3,760–$5,170 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,490–$22,480 | $24,980–$44,960 | $4,700–$8,460 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,740–$34,970+ | $27,470–$69,930+ | $5,170–$13,160+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $22,480–$49,950 | $44,960–$99,900 | $8,460–$18,800 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $24,980–$59,940+ | $49,950–$119,880+ | $9,400–$22,560+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $39,960–$59,940 | $79,920–$119,880 | $15,040–$22,560 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 99.9 m is $7,390–$9,990.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Killawarra is $7,390–$9,990.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.