Work out your fence
The block size is the median of 1 house lots in Hillville. The metres are an estimate; change them to match your property.
Hillville 2430 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,300–$8,520.
Your 50/50 share · treated pine paling
$6,300–$8,520
85.2 m on a typical block · NSW median of fencers’ prices
The block size is the median of 1 house lots in Hillville. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,300–$8,520 | $12,610–$17,040 | $2,220–$3,000 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,330–$6,730 | $10,650–$13,460 | $1,880–$2,370 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,280–$6,390 | $2,560–$12,780 | $450–$2,250 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,700–$3,830 | $3,410–$7,670 | $600–$1,350 |
| Timber picketfrontNational price | $60–$350/m | $2,470–$14,910 | $4,940–$29,820 | $870–$5,250 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,410–$17,040 | $6,820–$34,080 | $1,200–$6,000 |
| Tubular metalfront, poolNational price | $180–$350/m | $7,670–$14,910 | $15,340–$29,820 | $2,700–$5,250 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $7,840–$13,460 | $15,680–$26,920 | $2,760–$4,740 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $8,520–$11,720 | $17,040–$23,430 | $3,000–$4,130 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $10,650–$19,170 | $21,300–$38,340 | $3,750–$6,750 |
| Frameless glasspoolNational price | $280–$700+/m | $11,720–$29,820+ | $23,430–$59,640+ | $4,130–$10,500+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $19,170–$42,600 | $38,340–$85,200 | $6,750–$15,000 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $21,300–$51,120+ | $42,600–$102,240+ | $7,500–$18,000+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $34,080–$51,120 | $68,160–$102,240 | $12,000–$18,000 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 85.2 m is $6,300–$8,520.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 100% of local lots have a laneway.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Hillville is $6,300–$8,520.