Work out your fence
The block size is the median of 3 house lots in Hannam Vale. The metres are an estimate; change them to match your property.
Hannam Vale 2443 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,280–$8,480.
Your 50/50 share · treated pine paling
$6,280–$8,480
84.8 m on a typical block · NSW median of fencers’ prices
The block size is the median of 3 house lots in Hannam Vale. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,280–$8,480 | $12,550–$16,960 | $2,970–$4,020 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,300–$6,700 | $10,600–$13,400 | $2,510–$3,180 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,270–$6,360 | $2,540–$12,720 | $600–$3,020 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,700–$3,820 | $3,390–$7,630 | $800–$1,810 |
| Timber picketfrontNational price | $60–$350/m | $2,460–$14,840 | $4,920–$29,680 | $1,170–$7,040 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,390–$16,960 | $6,780–$33,920 | $1,610–$8,040 |
| Tubular metalfront, poolNational price | $180–$350/m | $7,630–$14,840 | $15,260–$29,680 | $3,620–$7,040 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $7,800–$13,400 | $15,600–$26,800 | $3,700–$6,350 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $8,480–$11,660 | $16,960–$23,320 | $4,020–$5,530 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $10,600–$19,080 | $21,200–$38,160 | $5,030–$9,050 |
| Frameless glasspoolNational price | $280–$700+/m | $11,660–$29,680+ | $23,320–$59,360+ | $5,530–$14,070+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $19,080–$42,400 | $38,160–$84,800 | $9,050–$20,100 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $21,200–$50,880+ | $42,400–$101,760+ | $10,050–$24,120+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $33,920–$50,880 | $67,840–$101,760 | $16,080–$24,120 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 84.8 m is $6,280–$8,480.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Hannam Vale is $6,280–$8,480.