Work out your fence
The block size is Median of 2 house lots in Gleniffer. The metres are an estimate; change them to match your property.
Gleniffer 2454 · Bellingen · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,900–$9,330.
Your 50/50 share · treated pine paling
$6,900–$9,330
93.3 m on a typical block · NSW median of fencers’ prices
The block size is Median of 2 house lots in Gleniffer. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,900–$9,330 | $13,810–$18,660 | $2,800–$3,780 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,830–$7,370 | $11,660–$14,740 | $2,360–$2,990 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,400–$7,000 | $2,800–$14,000 | $570–$2,840 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,870–$4,200 | $3,730–$8,400 | $760–$1,700 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,710–$16,330 | $5,410–$32,660 | $1,100–$6,610 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,730–$18,660 | $7,460–$37,320 | $1,510–$7,560 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,400–$16,330 | $16,790–$32,660 | $3,400–$6,610 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,580–$14,740 | $17,170–$29,480 | $3,480–$5,970 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,330–$12,830 | $18,660–$25,660 | $3,780–$5,200 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,660–$20,990 | $23,330–$41,990 | $4,730–$8,510 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,830–$32,660+ | $25,660–$65,310+ | $5,200–$13,230+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $20,990–$46,650 | $41,990–$93,300 | $8,510–$18,900 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,330–$55,980+ | $46,650–$111,960+ | $9,450–$22,680+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $37,320–$55,980 | $74,640–$111,960 | $15,120–$22,680 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Bellingen fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 93.3 m is $6,900–$9,330.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Gleniffer is $6,900–$9,330.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.