Work out your fence
The block size is Median of 3 house lots in Girvan. The metres are an estimate; change them to match your property.
Girvan 2425 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,350–$8,580.
Your 50/50 share · treated pine paling
$6,350–$8,580
85.8 m on a typical block · NSW median of fencers’ prices
The block size is Median of 3 house lots in Girvan. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,350–$8,580 | $12,700–$17,160 | $3,150–$4,260 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,360–$6,780 | $10,730–$13,560 | $2,660–$3,370 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,290–$6,440 | $2,570–$12,870 | $640–$3,200 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,720–$3,860 | $3,430–$7,720 | $850–$1,920 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,490–$15,020 | $4,980–$30,030 | $1,240–$7,460 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,430–$17,160 | $6,860–$34,320 | $1,700–$8,520 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $7,720–$15,020 | $15,440–$30,030 | $3,830–$7,460 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $7,890–$13,560 | $15,790–$27,110 | $3,920–$6,730 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $8,580–$11,800 | $17,160–$23,600 | $4,260–$5,860 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $10,730–$19,310 | $21,450–$38,610 | $5,330–$9,590 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $11,800–$30,030+ | $23,600–$60,060+ | $5,860–$14,910+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $19,310–$42,900 | $38,610–$85,800 | $9,590–$21,300 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $21,450–$51,480+ | $42,900–$102,960+ | $10,650–$25,560+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $34,320–$51,480 | $68,640–$102,960 | $17,040–$25,560 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 85.8 m is $6,350–$8,580.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Girvan is $6,350–$8,580.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.