Work out your fence
The block size is Median of 2 house lots in Failford. The metres are an estimate; change them to match your property.
Failford 2430 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $11,090–$14,990.
Your 50/50 share · treated pine paling
$11,090–$14,990
149.9 m on a typical block · NSW median of fencers’ prices
The block size is Median of 2 house lots in Failford. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $11,090–$14,990 | $22,190–$29,980 | $1,630–$2,200 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $9,370–$11,840 | $18,740–$23,680 | $1,380–$1,740 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $2,250–$11,240 | $4,500–$22,490 | $330–$1,650 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $3,000–$6,750 | $6,000–$13,490 | $440–$990 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $4,350–$26,230 | $8,690–$52,470 | $640–$3,850 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $6,000–$29,980 | $11,990–$59,960 | $880–$4,400 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $13,490–$26,230 | $26,980–$52,470 | $1,980–$3,850 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $13,790–$23,680 | $27,580–$47,370 | $2,020–$3,480 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $14,990–$20,610 | $29,980–$41,220 | $2,200–$3,030 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $18,740–$33,730 | $37,480–$67,460 | $2,750–$4,950 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $20,610–$52,470+ | $41,220–$104,930+ | $3,030–$7,700+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $33,730–$74,950 | $67,460–$149,900 | $4,950–$11,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $37,480–$89,940+ | $74,950–$179,880+ | $5,500–$13,200+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $59,960–$89,940 | $119,920–$179,880 | $8,800–$13,200 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 149.9 m is $11,090–$14,990.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Failford is $11,090–$14,990.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.