Work out your fence
The block size is the median of 3 house lots in Dyers Crossing. The metres are an estimate; change them to match your property.
Dyers Crossing 2429 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $9,550–$12,910.
Your 50/50 share · treated pine paling
$9,550–$12,910
129.1 m on a typical block · NSW median of fencers’ prices
The block size is the median of 3 house lots in Dyers Crossing. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $9,550–$12,910 | $19,110–$25,820 | $2,970–$4,020 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $8,070–$10,200 | $16,140–$20,400 | $2,510–$3,180 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,940–$9,680 | $3,870–$19,370 | $600–$3,020 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,580–$5,810 | $5,160–$11,620 | $800–$1,810 |
| Timber picketfrontNational price | $60–$350/m | $3,740–$22,590 | $7,490–$45,190 | $1,170–$7,040 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $5,160–$25,820 | $10,330–$51,640 | $1,610–$8,040 |
| Tubular metalfront, poolNational price | $180–$350/m | $11,620–$22,590 | $23,240–$45,190 | $3,620–$7,040 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $11,880–$20,400 | $23,750–$40,800 | $3,700–$6,350 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $12,910–$17,750 | $25,820–$35,500 | $4,020–$5,530 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $16,140–$29,050 | $32,280–$58,100 | $5,030–$9,050 |
| Frameless glasspoolNational price | $280–$700+/m | $17,750–$45,190+ | $35,500–$90,370+ | $5,530–$14,070+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $29,050–$64,550 | $58,100–$129,100 | $9,050–$20,100 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $32,280–$77,460+ | $64,550–$154,920+ | $10,050–$24,120+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $51,640–$77,460 | $103,280–$154,920 | $16,080–$24,120 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 129.1 m is $9,550–$12,910.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Dyers Crossing is $9,550–$12,910.