Work out your fence
The block size is the median of 1 house lots in Darkwood. The metres are an estimate; change them to match your property.
Darkwood 2454 · Bellingen · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,840–$10,590.
Your 50/50 share · treated pine paling
$7,840–$10,590
105.9 m on a typical block · NSW median of fencers’ prices
The block size is the median of 1 house lots in Darkwood. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,840–$10,590 | $15,670–$21,180 | $2,930–$3,960 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,620–$8,370 | $13,240–$16,730 | $2,480–$3,130 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,590–$7,940 | $3,180–$15,890 | $590–$2,970 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,120–$4,770 | $4,240–$9,530 | $790–$1,780 |
| Timber picketfrontNational price | $60–$350/m | $3,070–$18,530 | $6,140–$37,070 | $1,150–$6,930 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $4,240–$21,180 | $8,470–$42,360 | $1,580–$7,920 |
| Tubular metalfront, poolNational price | $180–$350/m | $9,530–$18,530 | $19,060–$37,070 | $3,560–$6,930 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,740–$16,730 | $19,490–$33,460 | $3,640–$6,260 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $10,590–$14,560 | $21,180–$29,120 | $3,960–$5,450 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $13,240–$23,830 | $26,480–$47,660 | $4,950–$8,910 |
| Frameless glasspoolNational price | $280–$700+/m | $14,560–$37,070+ | $29,120–$74,130+ | $5,450–$13,860+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $23,830–$52,950 | $47,660–$105,900 | $8,910–$19,800 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $26,480–$63,540+ | $52,950–$127,080+ | $9,900–$23,760+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $42,360–$63,540 | $84,720–$127,080 | $15,840–$23,760 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Bellingen fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 105.9 m is $7,840–$10,590.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Darkwood is $7,840–$10,590.