Work out your fence
The block size is Median of 1 house lots in Darawank. The metres are an estimate; change them to match your property.
Darawank 2428 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $5,180–$7,000.
Your 50/50 share · treated pine paling
$5,180–$7,000
70 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Darawank. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $5,180–$7,000 | $10,360–$14,000 | $3,700–$5,000 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $4,380–$5,530 | $8,750–$11,060 | $3,130–$3,950 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,050–$5,250 | $2,100–$10,500 | $750–$3,750 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,400–$3,150 | $2,800–$6,300 | $1,000–$2,250 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,030–$12,250 | $4,060–$24,500 | $1,450–$8,750 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $2,800–$14,000 | $5,600–$28,000 | $2,000–$10,000 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $6,300–$12,250 | $12,600–$24,500 | $4,500–$8,750 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $6,440–$11,060 | $12,880–$22,120 | $4,600–$7,900 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $7,000–$9,630 | $14,000–$19,250 | $5,000–$6,880 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $8,750–$15,750 | $17,500–$31,500 | $6,250–$11,250 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $9,630–$24,500+ | $19,250–$49,000+ | $6,880–$17,500+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $15,750–$35,000 | $31,500–$70,000 | $11,250–$25,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $17,500–$42,000+ | $35,000–$84,000+ | $12,500–$30,000+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $28,000–$42,000 | $56,000–$84,000 | $20,000–$30,000 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 70 m is $5,180–$7,000.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Darawank is $5,180–$7,000.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.