Work out your fence
The block size is the median of 1 house lots in Dangarsleigh. The metres are an estimate; change them to match your property.
Dangarsleigh 2350 · Armidale Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,110–$8,260.
Your 50/50 share · treated pine paling
$6,110–$8,260
82.6 m on a typical block · NSW median of fencers’ prices
The block size is the median of 1 house lots in Dangarsleigh. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,110–$8,260 | $12,220–$16,520 | $2,800–$3,780 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,160–$6,530 | $10,330–$13,050 | $2,360–$2,990 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,240–$6,200 | $2,480–$12,390 | $570–$2,840 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,650–$3,720 | $3,300–$7,430 | $760–$1,700 |
| Timber picketfrontNational price | $60–$350/m | $2,400–$14,450 | $4,790–$28,910 | $1,100–$6,610 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,300–$16,520 | $6,610–$33,040 | $1,510–$7,560 |
| Tubular metalfront, poolNational price | $180–$350/m | $7,430–$14,450 | $14,870–$28,910 | $3,400–$6,610 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $7,600–$13,050 | $15,200–$26,100 | $3,480–$5,970 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $8,260–$11,360 | $16,520–$22,720 | $3,780–$5,200 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $10,330–$18,590 | $20,650–$37,170 | $4,730–$8,510 |
| Frameless glasspoolNational price | $280–$700+/m | $11,360–$28,910+ | $22,720–$57,820+ | $5,200–$13,230+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $18,590–$41,300 | $37,170–$82,600 | $8,510–$18,900 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $20,650–$49,560+ | $41,300–$99,120+ | $9,450–$22,680+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $33,040–$49,560 | $66,080–$99,120 | $15,120–$22,680 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Armidale Regional fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 82.6 m is $6,110–$8,260.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Front and secondary street fences can be no higher than 1.2 m and must be at least 50% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Dangarsleigh is $6,110–$8,260.