Work out your fence
The block size is Median of 56 house lots in Crowdy Head. The metres are an estimate; change them to match your property.
Crowdy Head 2427 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,070–$9,550.
Your 50/50 share · treated pine paling
$7,070–$9,550
95.5 m on a typical block · NSW median of fencers’ prices
The block size is Median of 56 house lots in Crowdy Head. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,070–$9,550 | $14,130–$19,100 | $2,660–$3,600 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,970–$7,540 | $11,940–$15,090 | $2,250–$2,840 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,430–$7,160 | $2,870–$14,330 | $540–$2,700 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,910–$4,300 | $3,820–$8,600 | $720–$1,620 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,770–$16,710 | $5,540–$33,430 | $1,040–$6,300 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,820–$19,100 | $7,640–$38,200 | $1,440–$7,200 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,600–$16,710 | $17,190–$33,430 | $3,240–$6,300 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,790–$15,090 | $17,570–$30,180 | $3,310–$5,690 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,550–$13,130 | $19,100–$26,260 | $3,600–$4,950 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,940–$21,490 | $23,880–$42,980 | $4,500–$8,100 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,130–$33,430+ | $26,260–$66,850+ | $4,950–$12,600+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,490–$47,750 | $42,980–$95,500 | $8,100–$18,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,880–$57,300+ | $47,750–$114,600+ | $9,000–$21,600+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $38,200–$57,300 | $76,400–$114,600 | $14,400–$21,600 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 95.5 m is $7,070–$9,550.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Crowdy Head is $7,070–$9,550.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.