Work out your fence
The block size is Median of 1 house lots in Bunyah. The metres are an estimate; change them to match your property.
Bunyah 2429 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,380–$11,330.
Your 50/50 share · treated pine paling
$8,380–$11,330
113.3 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Bunyah. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,380–$11,330 | $16,770–$22,660 | $2,620–$3,540 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $7,080–$8,950 | $14,160–$17,900 | $2,210–$2,800 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,700–$8,500 | $3,400–$17,000 | $530–$2,660 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,270–$5,100 | $4,530–$10,200 | $710–$1,590 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,290–$19,830 | $6,570–$39,660 | $1,030–$6,200 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,530–$22,660 | $9,060–$45,320 | $1,420–$7,080 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,200–$19,830 | $20,390–$39,660 | $3,190–$6,200 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,420–$17,900 | $20,850–$35,800 | $3,260–$5,590 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,330–$15,580 | $22,660–$31,160 | $3,540–$4,870 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $14,160–$25,490 | $28,330–$50,990 | $4,430–$7,970 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $15,580–$39,660+ | $31,160–$79,310+ | $4,870–$12,390+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $25,490–$56,650 | $50,990–$113,300 | $7,970–$17,700 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $28,330–$67,980+ | $56,650–$135,960+ | $8,850–$21,240+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $45,320–$67,980 | $90,640–$135,960 | $14,160–$21,240 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 113.3 m is $8,380–$11,330.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Bunyah is $8,380–$11,330.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.