Work out your fence
The block size is Median of 1 house lots in Bowman. The metres are an estimate; change them to match your property.
Bowman 2422 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,590–$8,910.
Your 50/50 share · treated pine paling
$6,590–$8,910
89.1 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Bowman. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,590–$8,910 | $13,190–$17,820 | $2,970–$4,020 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,570–$7,040 | $11,140–$14,080 | $2,510–$3,180 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,340–$6,680 | $2,670–$13,370 | $600–$3,020 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,780–$4,010 | $3,560–$8,020 | $800–$1,810 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,580–$15,590 | $5,170–$31,180 | $1,170–$7,040 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,560–$17,820 | $7,130–$35,640 | $1,610–$8,040 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,020–$15,590 | $16,040–$31,180 | $3,620–$7,040 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,200–$14,080 | $16,390–$28,160 | $3,700–$6,350 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $8,910–$12,250 | $17,820–$24,500 | $4,020–$5,530 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,140–$20,050 | $22,280–$40,100 | $5,030–$9,050 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,250–$31,180+ | $24,500–$62,370+ | $5,530–$14,070+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $20,050–$44,550 | $40,100–$89,100 | $9,050–$20,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $22,280–$53,460+ | $44,550–$106,920+ | $10,050–$24,120+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $35,640–$53,460 | $71,280–$106,920 | $16,080–$24,120 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 89.1 m is $6,590–$8,910.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Bowman is $6,590–$8,910.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.