Work out your fence
The block size is Median of 1 house lots in Bobin. The metres are an estimate; change them to match your property.
Bobin 2429 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,970–$10,770.
Your 50/50 share · treated pine paling
$7,970–$10,770
107.7 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Bobin. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,970–$10,770 | $15,940–$21,540 | $2,030–$2,740 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,730–$8,510 | $13,460–$17,020 | $1,710–$2,160 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,620–$8,080 | $3,230–$16,160 | $410–$2,060 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,150–$4,850 | $4,310–$9,690 | $550–$1,230 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,120–$18,850 | $6,250–$37,700 | $790–$4,800 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,310–$21,540 | $8,620–$43,080 | $1,100–$5,480 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,690–$18,850 | $19,390–$37,700 | $2,470–$4,800 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,910–$17,020 | $19,820–$34,030 | $2,520–$4,330 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,770–$14,810 | $21,540–$29,620 | $2,740–$3,770 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,460–$24,230 | $26,930–$48,470 | $3,430–$6,170 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,810–$37,700+ | $29,620–$75,390+ | $3,770–$9,590+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $24,230–$53,850 | $48,470–$107,700 | $6,170–$13,700 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $26,930–$64,620+ | $53,850–$129,240+ | $6,850–$16,440+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $43,080–$64,620 | $86,160–$129,240 | $10,960–$16,440 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 107.7 m is $7,970–$10,770.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Bobin is $7,970–$10,770.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.