Work out your fence
The block size is Median of 1 house lots in Belbora. The metres are an estimate; change them to match your property.
Belbora 2422 · Mid-Coast · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $13,120–$17,730.
Your 50/50 share · treated pine paling
$13,120–$17,730
177.3 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Belbora. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $13,120–$17,730 | $26,240–$35,460 | $3,550–$4,800 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $11,080–$14,010 | $22,160–$28,010 | $3,000–$3,790 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $2,660–$13,300 | $5,320–$26,600 | $720–$3,600 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $3,550–$7,980 | $7,090–$15,960 | $960–$2,160 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $5,140–$31,030 | $10,280–$62,060 | $1,390–$8,400 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $7,090–$35,460 | $14,180–$70,920 | $1,920–$9,600 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $15,960–$31,030 | $31,910–$62,060 | $4,320–$8,400 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $16,310–$28,010 | $32,620–$56,030 | $4,420–$7,580 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $17,730–$24,380 | $35,460–$48,760 | $4,800–$6,600 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $22,160–$39,890 | $44,330–$79,790 | $6,000–$10,800 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $24,380–$62,060+ | $48,760–$124,110+ | $6,600–$16,800+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $39,890–$88,650 | $79,790–$177,300 | $10,800–$24,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $44,330–$106,380+ | $88,650–$212,760+ | $12,000–$28,800+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $70,920–$106,380 | $141,840–$212,760 | $19,200–$28,800 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Coast fence rules · Read the full rules
We’ve checked some of Mid-Coast’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 177.3 m is $13,120–$17,730.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 100% of local lots have a laneway.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Belbora is $13,120–$17,730.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.