Work out your fence
The block size is the median of 2 house lots in Barragga Bay. The metres are an estimate; change them to match your property.
Barragga Bay 2546 · Bega Valley · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $11,600–$15,680.
Your 50/50 share · treated pine paling
$11,600–$15,680
156.8 m on a typical block · NSW median of fencers’ prices
The block size is the median of 2 house lots in Barragga Bay. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $11,600–$15,680 | $23,210–$31,360 | $950–$1,280 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $9,800–$12,390 | $19,600–$24,770 | $800–$1,010 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $2,350–$11,760 | $4,700–$23,520 | $190–$960 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $3,140–$7,060 | $6,270–$14,110 | $260–$580 |
| Timber picketfrontNational price | $60–$350/m | $4,550–$27,440 | $9,090–$54,880 | $370–$2,240 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $6,270–$31,360 | $12,540–$62,720 | $510–$2,560 |
| Tubular metalfront, poolNational price | $180–$350/m | $14,110–$27,440 | $28,220–$54,880 | $1,150–$2,240 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $14,430–$24,770 | $28,850–$49,550 | $1,180–$2,020 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $15,680–$21,560 | $31,360–$43,120 | $1,280–$1,760 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $19,600–$35,280 | $39,200–$70,560 | $1,600–$2,880 |
| Frameless glasspoolNational price | $280–$700+/m | $21,560–$54,880+ | $43,120–$109,760+ | $1,760–$4,480+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $35,280–$78,400 | $70,560–$156,800 | $2,880–$6,400 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $39,200–$94,080+ | $78,400–$188,160+ | $3,200–$7,680+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $62,720–$94,080 | $125,440–$188,160 | $5,120–$7,680 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Bega Valley fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 156.8 m is $11,600–$15,680.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Barragga Bay is $11,600–$15,680.