Work out your fence
The block size is Median of 2 house lots in Aberfoyle. The metres are an estimate; change them to match your property.
Aberfoyle 2350 · Armidale Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,640–$11,680.
Your 50/50 share · treated pine paling
$8,640–$11,680
116.8 m on a typical block · NSW median of fencers’ prices
The block size is Median of 2 house lots in Aberfoyle. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,640–$11,680 | $17,290–$23,360 | $2,130–$2,880 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $7,300–$9,230 | $14,600–$18,450 | $1,800–$2,280 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,750–$8,760 | $3,500–$17,520 | $430–$2,160 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,340–$5,260 | $4,670–$10,510 | $580–$1,300 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,390–$20,440 | $6,770–$40,880 | $840–$5,040 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,670–$23,360 | $9,340–$46,720 | $1,150–$5,760 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,510–$20,440 | $21,020–$40,880 | $2,590–$5,040 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,750–$18,450 | $21,490–$36,910 | $2,650–$4,550 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,680–$16,060 | $23,360–$32,120 | $2,880–$3,960 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $14,600–$26,280 | $29,200–$52,560 | $3,600–$6,480 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $16,060–$40,880+ | $32,120–$81,760+ | $3,960–$10,080+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $26,280–$58,400 | $52,560–$116,800 | $6,480–$14,400 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $29,200–$70,080+ | $58,400–$140,160+ | $7,200–$17,280+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $46,720–$70,080 | $93,440–$140,160 | $11,520–$17,280 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Armidale Regional fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 116.8 m is $8,640–$11,680.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Front and secondary street fences can be no higher than 1.2 m and must be at least 50% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Aberfoyle is $8,640–$11,680.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.