Western Australia · local fence rules · checked 17 Nov 2026

Fence rules in Victoria Park.

Most fences here don’t need council approval: front fences up to 1.8 m and side or rear fences up to 1.8 m. Neighbours split a dividing fence 50/50.

Who pays for a dividing fence?

Neighbours split the cost of a dividing fence, and its repairs, 50/50.

Source: Official source · checked 17 Nov 2026

Front fence height limits

Solid up to 1.2 m, then see-through above that, up to 1.8 m. Local planning policies can vary this.

Source: Official source · checked 17 Nov 2026

When you need approval

No building permit if the fence follows your council's fencing local law. Where there isn't one, up to 1.8 m (0.75 m if masonry).

Read the council’s wording
Council page: "Generally, the height of a dividing fence on a residential and non-residential lot is required to be a minimum 1.8m to a maximum of 2.4m." "Any dividing fence that is brick or masonry and is more than 0.75m high requires a building permit application lodged to the Town." "Generally, it is recommended to contact the Town Building Services prior to submitting a building permit application to the Town for a dividing fence made of materials other than brick or masonry higher than 1.8m high, in case it may not be required."
Source ↗ · checked 17 Nov 2026

Source: Official source · checked 17 Nov 2026

Pool fence rules

Pools and spas that hold more than 300 mm of water need a safety barrier. Council inspects it at least every 4 years.

Read the council’s wording
Council page: "A building permit is required for the installation of a swimming pool/spa as well as a pool/spa barrier."
Source ↗ · checked 17 Nov 2026

Source: Official source · checked 17 Nov 2026

Fences in bushfire-prone areas

Bush fire prone areas are mapped by the Fire and Emergency Services Commissioner. Extra planning and building rules apply there.

Source: Official source · checked 17 Nov 2026

Other local fence rules

Other rules

Council page: "Activities on Thoroughfares and Trading in Thoroughfares and Public Places Local Law 2000 (12/05/2023) Local Laws Dog Local Law 2018 (12/05/2023) Local Laws Fencing Local Law 2021 (12/05/2023) Local Laws Health Local Law 2003 (12/05/2023) Local Laws Local Government Property Local Law 2000 (14/08/2023) Local Laws Meeting Procedures Local Law 2019 ("

What a fence costs in Victoria Park

Burswood has the most published lot data in Victoria Park.

FencePrice per metreYour 50/50 share
Treated pine paling in Burswood$60–$190/m
Colorbond steel in Burswood$110–$140/m

Fence rule FAQs

Do I need council approval for a fence in Victoria Park?

No building permit if the fence follows your council's fencing local law. Where there isn't one, up to 1.8 m (0.75 m if masonry).

Who pays for a dividing fence in Victoria Park?

Neighbours split the cost of a dividing fence, and its repairs, 50/50.

How high does a pool fence need to be in Victoria Park?

Pools and spas that hold more than 300 mm of water need a safety barrier. Council inspects it at least every 4 years.

Can I use a timber fence in a bushfire area?

Bush fire prone areas are mapped by the Fire and Emergency Services Commissioner. Extra planning and building rules apply there.

How much does a fence cost in Burswood?

Treated pine paling is $60–$190/m. Your half of a typical dividing fence is $2,820–$9,240.

Contact Victoria Park

Email [email protected]. Visit the council website.

Get quotes from Victoria Park fence builders

Compare local quotes with the typical price in Burswood.

  1. Tell us the suburb, fence and length. It takes about 2 minutes.
  2. We send it to up to 3 local fencers. Free for homeowners.
  3. Compare their quotes with the estimate above. You choose who to hire.
Get up to 3 quotes →

Rule headings use published category labels. Official sources should be checked before building. General information only. These are estimates, not quotes, and not legal, planning, building or financial advice. Check your own title, council and neighbour situation before you build.