Victoria · local fence rules · checked 17 Nov 2026

Fence rules in Yarra.

Most fences here don’t need council approval: front fences up to 1.5 m and side or rear fences up to 2 m. Neighbours split a dividing fence 50/50.

We’ve checked some of Yarra’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.

Who pays for a dividing fence?

Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.

Source: Official source · checked 17 Nov 2026

Front fence height limits

Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.

Source: Official source · checked 17 Nov 2026

When you need approval

Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.

Source: Official source · checked 17 Nov 2026

Pool fence rules

Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.

Source: Official source · checked 17 Nov 2026

Fences in bushfire-prone areas

No designated Bushfire Prone Area is mapped in Yarra. Check your address on VicPlan.

Read the council’s wording
No Bushfire Management Overlay areas are mapped in the Yarra Planning Scheme in the state overlay layer.
Source ↗ · checked 16 Nov 2026
Read the council’s wording
No designated Bushfire Prone Area polygon is recorded for Yarra in the state BPA layer.
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

Heritage and character areas

The Yarra planning scheme maps 557 Heritage Overlay areas. A planning permit is often needed to build or change a front fence there.

Read the council’s wording
The Yarra Planning Scheme has 557 Heritage Overlay areas mapped. In a Heritage Overlay a planning permit is often required to build or change a front fence; check the property and the overlay schedule.
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

Other local fence rules

Other rules

Council page: "Important Council may specify the type, height, materials and other requirements for fencing when issuing a notice."

What a fence costs in Yarra

Richmond has the most published lot data in Yarra.

FencePrice per metreYour 50/50 share
Treated pine paling in Richmond$140–$150/m
Colorbond steel in Richmond$170–$180/m

Fence rule FAQs

Do I need council approval for a fence in Yarra?

Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.

Who pays for a dividing fence in Yarra?

Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.

How high does a pool fence need to be in Yarra?

Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.

Can I use a timber fence in a bushfire area?

No designated Bushfire Prone Area is mapped in Yarra. Check your address on VicPlan.

How much does a fence cost in Richmond?

Treated pine paling is $140–$150/m. Your half of a typical dividing fence is $5,070–$5,350.

Contact Yarra

Email [email protected]. Check the council website for current contact details.

Get quotes from Yarra fence builders

Compare local quotes with the typical price in Richmond.

  1. Tell us the suburb, fence and length. It takes about 2 minutes.
  2. We send it to up to 3 local fencers. Free for homeowners.
  3. Compare their quotes with the estimate above. You choose who to hire.
Get up to 3 quotes →

Rule headings use published category labels. Official sources should be checked before building. General information only. These are estimates, not quotes, and not legal, planning, building or financial advice. Check your own title, council and neighbour situation before you build.