Victoria · local fence rules · checked 17 Nov 2026

Fence rules in Queenscliffe.

Most fences here don’t need council approval: front fences up to 1.5 m and side or rear fences up to 2 m. Neighbours split a dividing fence 50/50.

We’ve checked some of Queenscliffe’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.

Who pays for a dividing fence?

Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.

Source: Official source · checked 17 Nov 2026

Front fence height limits

Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.

Source: Official source · checked 17 Nov 2026

When you need approval

Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.

Source: Official source · checked 17 Nov 2026

Pool fence rules

Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.

Read the council’s wording
Council page: "Application to Register a Swimming Pool or Spa It is a requirement of the Victorian Building Regulations that any pool or spa capable of containing water to a depth of greater than 300mm must have compliant safety barriers." "A Building Permit must be issued prior to construction of a swimming pool, spa and associated safety barriers."
Source ↗ · checked 17 Nov 2026

Source: Official source · checked 17 Nov 2026

Fences in bushfire-prone areas

About 31% of Queenscliffe is a designated Bushfire Prone Area. Building work there needs at least BAL 12.5. The Bushfire Management Overlay also applies in parts, which can trigger a planning permit. Check your address on VicPlan.

Read the council’s wording
The Queenscliffe Planning Scheme applies the Bushfire Management Overlay (BMO) to 6 mapped areas. Buildings and works in the BMO generally need a planning permit; fencing materials may be constrained.
Source ↗ · checked 16 Nov 2026
Read the council’s wording
Parts of Queenscliffe are a designated Bushfire Prone Area: about 322 ha, roughly 30.6% of the municipality (BPA map LEGL./14-165, gazetted 07/04/2014). Building work in a BPA needs a minimum BAL 12.5 under AS 3959; the BAL is assessed per site.
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

Heritage and character areas

The Queenscliffe planning scheme maps 146 Heritage Overlay areas. A planning permit is often needed to build or change a front fence there.

Read the council’s wording
The Queenscliffe Planning Scheme has 146 Heritage Overlay areas mapped. In a Heritage Overlay a planning permit is often required to build or change a front fence; check the property and the overlay schedule.
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

What a fence costs in Queenscliffe

Point Lonsdale has the most published lot data in Queenscliffe.

FencePrice per metreYour 50/50 share
Treated pine paling in Point Lonsdale$110–$160/m
Colorbond steel in Point Lonsdale$120–$180/m

Fence rule FAQs

Do I need council approval for a fence in Queenscliffe?

Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.

Who pays for a dividing fence in Queenscliffe?

Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.

How high does a pool fence need to be in Queenscliffe?

Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.

Can I use a timber fence in a bushfire area?

About 31% of Queenscliffe is a designated Bushfire Prone Area. Building work there needs at least BAL 12.5. The Bushfire Management Overlay also applies in parts, which can trigger a planning permit. Check your address on VicPlan.

How much does a fence cost in Point Lonsdale?

Treated pine paling is $110–$160/m. Your half of a typical dividing fence is $5,060–$7,300.

Contact Queenscliffe

Email [email protected]. Check the council website for current contact details.

Get quotes from Queenscliffe fence builders

Compare local quotes with the typical price in Point Lonsdale.

  1. Tell us the suburb, fence and length. It takes about 2 minutes.
  2. We send it to up to 3 local fencers. Free for homeowners.
  3. Compare their quotes with the estimate above. You choose who to hire.
Get up to 3 quotes →

Rule headings use published category labels. Official sources should be checked before building. General information only. These are estimates, not quotes, and not legal, planning, building or financial advice. Check your own title, council and neighbour situation before you build.