Who pays for a dividing fence?
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Source: Official source · checked 17 Nov 2026
Victoria · local fence rules · checked 17 Nov 2026
Most fences here don’t need council approval: front fences up to 1.5 m and side or rear fences up to 2 m. Neighbours split a dividing fence 50/50.
We’ve checked some of East Gippsland’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Source: Official source · checked 17 Nov 2026
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Source: Official source · checked 17 Nov 2026
Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.
Source: Official source · checked 17 Nov 2026
Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.
Council page: "All Victorian pool and outdoor spa owners must register their pools with Council."Source ↗ · checked 16 Nov 2026
Source: Official source · checked 17 Nov 2026
About 99% of East Gippsland is a designated Bushfire Prone Area. Building work there needs at least BAL 12.5. The Bushfire Management Overlay also applies in parts, which can trigger a planning permit. Check your address on VicPlan.
The East Gippsland Planning Scheme applies the Bushfire Management Overlay (BMO) to 145 mapped areas. Buildings and works in the BMO generally need a planning permit; fencing materials may be constrained.Source ↗ · checked 16 Nov 2026
Parts of East Gippsland are a designated Bushfire Prone Area: about 2,061,891 ha, roughly 98.5% of the municipality (BPA map LEGL./25-365, gazetted 16/06/2026). Building work in a BPA needs a minimum BAL 12.5 under AS 3959; the BAL is assessed per site.Source ↗ · checked 16 Nov 2026
Source: Official source · checked 17 Nov 2026
The East Gippsland planning scheme maps 227 Heritage Overlay areas. A planning permit is often needed to build or change a front fence there.
The East Gippsland Planning Scheme has 227 Heritage Overlay areas mapped. In a Heritage Overlay a planning permit is often required to build or change a front fence; check the property and the overlay schedule.Source ↗ · checked 16 Nov 2026
Source: Official source · checked 17 Nov 2026
Bairnsdale has the most published lot data in East Gippsland.
| Fence | Price per metre | Your 50/50 share |
|---|---|---|
| Treated pine paling in Bairnsdale | $110–$160/m | $5,430–$7,820 |
| Colorbond steel in Bairnsdale | $120–$180/m | $5,820–$8,950 |
Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.
About 99% of East Gippsland is a designated Bushfire Prone Area. Building work there needs at least BAL 12.5. The Bushfire Management Overlay also applies in parts, which can trigger a planning permit. Check your address on VicPlan.
Treated pine paling is $110–$160/m. Your half of a typical dividing fence is $5,430–$7,820.
Email [email protected]. Check the council website for current contact details.
Compare local quotes with the typical price in Bairnsdale.
Rule headings use published category labels. Official sources should be checked before building. General information only. These are estimates, not quotes, and not legal, planning, building or financial advice. Check your own title, council and neighbour situation before you build.