Who pays for a dividing fence?
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Source: Official source · checked 17 Nov 2026
New South Wales · local fence rules · checked 17 Nov 2026
Most fences here don’t need council approval: front fences up to 1.2 m and side or rear fences up to 1.8 m. Neighbours split a dividing fence 50/50.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Source: Official source · checked 17 Nov 2026
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Source: Official source · checked 17 Nov 2026
Side and rear fences up to 1.8 m (1.2 m if masonry) need no DA in most residential zones. This exemption doesn't apply on heritage items or flood control lots.
Council page: "Some of the requirements are: A barrier/pool fence must be located between the pool and the house and be a minimum height 1200mm Fences must have a minimum height of 1800mm along a boundary." "(An alternative boundary fence design is available under the Standard) Pool fences must have a minimum 900mm separation between the upper and lower horizontal members to maintain non-climbable zone non-climbable zone extending from the barrier 300mm into pool area and 900mm outside pool area maximum"Source ↗ · checked 17 Nov 2026
Source: Official source · checked 17 Nov 2026
Every pool or spa must be on the NSW Swimming Pool Register. Barriers must be at least 1.2 m high with gaps no more than 10 cm.
Council page: "It is the pool owner’s responsibility to register their pool." "Spa pools are also covered by the legislation and should be separated by a child-resistant pool safety barrier in accordance with Australian Standard AS1926.1-2012."Source ↗ · checked 17 Nov 2026
Source: Official source · checked 17 Nov 2026
On bush fire prone land, a fence built without approval must be non-combustible or hardwood. Check your lot on the NSW Planning Portal.
Source: Official source · checked 17 Nov 2026
The no-approval fence rules don't apply on heritage items. Check with council.
Council page: "Council thanks you for your patience and understanding In This Section Understanding Planning in Strathfield Determination List Developer Contributions and Voluntary Planning Agreement Register Development Applications Heritage Parramatta Road Urban Amenity Improvement Plan Planning Compliance Asbestos and Development Building and Compliance Forms "Source ↗ · checked 17 Nov 2026
Source: Official source · checked 17 Nov 2026
Strathfield has the most published lot data in Strathfield.
| Fence | Price per metre | Your 50/50 share |
|---|---|---|
| Treated pine paling in Strathfield | $150–$180/m | $8,000–$9,500 |
| Colorbond steel in Strathfield | $120–$140/m | $6,300–$7,630 |
Side and rear fences up to 1.8 m (1.2 m if masonry) need no DA in most residential zones. This exemption doesn't apply on heritage items or flood control lots.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Every pool or spa must be on the NSW Swimming Pool Register. Barriers must be at least 1.2 m high with gaps no more than 10 cm.
On bush fire prone land, a fence built without approval must be non-combustible or hardwood. Check your lot on the NSW Planning Portal.
Treated pine paling is $150–$180/m. Your half of a typical dividing fence is $8,000–$9,500.
Email [email protected]. Visit the council website.
Compare local quotes with the typical price in Strathfield.
Rule headings use published category labels. Official sources should be checked before building. General information only. These are estimates, not quotes, and not legal, planning, building or financial advice. Check your own title, council and neighbour situation before you build.