Who pays for a dividing fence?
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Source: Official source · checked 17 Nov 2026
New South Wales · local fence rules · checked 17 Nov 2026
Most fences here don’t need council approval: front fences up to 1.2 m and side or rear fences up to 1.8 m. Neighbours split a dividing fence 50/50.
We’ve checked some of Murrumbidgee’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Source: Official source · checked 17 Nov 2026
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Source: Official source · checked 17 Nov 2026
Side and rear fences up to 1.8 m (1.2 m if masonry) need no DA in most residential zones. This exemption doesn't apply on heritage items or flood control lots.
Source: Official source · checked 17 Nov 2026
Every pool or spa must be on the NSW Swimming Pool Register. Barriers must be at least 1.2 m high with gaps no more than 10 cm.
Council page: "Restrict access - by placing a barrier between the child and the water - either by placing a barrier around the water (appropriate pool fencing) or a barrier around the child (Child Safe Play Area)." "Key requirements for approval and to pass inspections Property owners - registering your pool All pool owners are now required to register their pool on an online register provided by the NSW State Government."Source ↗ · checked 17 Nov 2026
Source: Official source · checked 17 Nov 2026
On bush fire prone land, a fence built without approval must be non-combustible or hardwood. Check your lot on the NSW Planning Portal.
Source: Official source · checked 17 Nov 2026
The no-approval fence rules don't apply on heritage items. Check with council.
Source: Official source · checked 17 Nov 2026
Darlington Point has the most published lot data in Murrumbidgee.
| Fence | Price per metre | Your 50/50 share |
|---|---|---|
| Treated pine paling in Darlington Point | $150–$200/m | $7,700–$10,400 |
| Colorbond steel in Darlington Point | $130–$160/m | $6,500–$8,220 |
Side and rear fences up to 1.8 m (1.2 m if masonry) need no DA in most residential zones. This exemption doesn't apply on heritage items or flood control lots.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Every pool or spa must be on the NSW Swimming Pool Register. Barriers must be at least 1.2 m high with gaps no more than 10 cm.
On bush fire prone land, a fence built without approval must be non-combustible or hardwood. Check your lot on the NSW Planning Portal.
Treated pine paling is $150–$200/m. Your half of a typical dividing fence is $7,700–$10,400.
Email [email protected]. Visit the council website.
Compare local quotes with the typical price in Darlington Point.
Rule headings use published category labels. Official sources should be checked before building. General information only. These are estimates, not quotes, and not legal, planning, building or financial advice. Check your own title, council and neighbour situation before you build.